SDS PLUS DRILL BIT ( 10.0 MM)  10MM X 120MM

Share:


SDS PLUS DRILL BIT ( 10.0 MM) 10MM X 120MM

The SDS shank has the advantage of fitting into a simple spring-loaded chuck, so that bits are simply pushed into the chuck without tightening. This shank and chucks made for it are especially suited to hammer drilling with masonry drills in stone and concrete.The hammer of the drill hits the flat end of the shank.

 Inquiry - SDS PLUS DRILL BIT ( 10.0 MM) 10MM X 120MM