Building automation system, Valve
AI-Powered Image SearchSelected tag
Tag Selection
The valves in the ZTV/ZTR series are used for control of hot and cold water in climate, heating and ventilation systems. The control valves in the ZTV/ZTR series are available in 2- and 3-way versions. Body in brass, spindle in stainless steel. Plug in brass and O-ring in EPDM. The valves have equal percentage flow characteristics.
More Details...
Valves intended for on/off control of hot or cold water in heating or cooling systems. The valves can only be used together with Regin’s RVAFC actuators. The valves are available as both 2- and 3-way models.
- Size DN15…DN32
- Kvs value 3.
More Details...
Intended for on/off control of hot or cold water in heating or cooling systems. The actuator has a synchronous motor and spring return mechanism. It is intended for use together with Regin’s ZFCM valves. The RVAFC series of actuators is designed for temperature control in heating and cooling systems.
More Details...
The RTA actuators are designed for Regin’s FVR and VHR valve ranges.
Models
There are five models. RTAM-24, RTAOM-24, RTAM-230 and RTAOM-230 are intended for 2-point (On/off) control. RTAM-24A is intended for proportional
control with 0...10 V control signal.
Models
There are five models. RTAM-24, RTAOM-24, RTAM-230 and RTAOM-230 are intended for 2-point (On/off) control. RTAM-24A is intended for proportional
control with 0...10 V control signal.
More Details...
The MTVS and MTRS range of valves are intended for use in heating and ventilation systems. They are also highly suitable for systems where dezincification
resistant materials is a requirement.
resistant materials is a requirement.
- Size DN15–DN50
- Kvs value 0.63...39
- Rangeability 100:1
- Media temperature -5...
More Details...
The FVR valve series is intended to be used together with the thermal actuators in the RTA series and a controller/thermostat for controlling temperatures in heating and cooling systems, such as convectors, cooling ceilings etc.
Description
The valves are delivered with a grey protectioncap.
Description
The valves are delivered with a grey protectioncap.
More Details...
The DFCM series’ two-position valves are designed for temperature control in heating and cooling systems. The actuator is designed to withstand high moisture
conditions.
Function
On demand, the valve is opened by a signal from a thermostat (supply voltage on).
conditions.
Function
On demand, the valve is opened by a signal from a thermostat (supply voltage on).
More Details...
BTV is intended for hot and cold water, cooling systems, steam, and district heating systems within the temperature range -5°C...185°C.
Function
The valve is closed when the stem is in its lowest position.
Actuator
The valve is pressure balanced and can therefore handle high differential pressure with low force.
Function
The valve is closed when the stem is in its lowest position.
Actuator
The valve is pressure balanced and can therefore handle high differential pressure with low force.
More Details...
The valve range BTR is used with RVA5 actuators. The valve is intended for cold and hot water, glycol-mixed water or steam. The 3-way valve is intended to be used as a mixing valve.
Function
BTR (3-way valve): Open between port 2 and port 1 when the stem is in its lowest position. (Is in this position closed between ports 3 and 1).
Function
BTR (3-way valve): Open between port 2 and port 1 when the stem is in its lowest position. (Is in this position closed between ports 3 and 1).
More Details...
Valves designed for control of hot, cold or glycolmixed water in heating and ventilation systems. The valves are intended for use together with Regin’s RVAN5…/RVAN10… actuators.
- Size DN15…DN50
- Kvs value 0.63…40
- Media temperature -5…+140°C
- Pressure rating PN16
- Rangeability 100:1
The valves in the series 2SAS.../2SBS... are intended for hot and cold water, glycol mixed water or steam within the temperature range -5°C...185°C.
The valves are pressure balanced from DN20, type 2SB, and are therefore able to handle high differential pressures with low force.
Function
The valve closes when the stem is in its lowest position.
The valves are pressure balanced from DN20, type 2SB, and are therefore able to handle high differential pressures with low force.
Function
The valve closes when the stem is in its lowest position.
More Details...
RVAN25-230 is a valve actuator intended for control of Regin’s valves. Information on which valves are suitable can be found in the product information for each valve. Regin also offers adapters for adjusting the actuator to valves of other brands.
More Details...
RVAN25-24 is a valve actuator intended for control of Regin’s valves. Using an adaptor kit, the actuator can also be adapted for use with other valves on the market.
Stroke and end position calibration
Stroke and end position calibration is not necessary due to a construction utilizing end position stops.
Stroke and end position calibration
Stroke and end position calibration is not necessary due to a construction utilizing end position stops.
More Details...
RVAN5-230 is a valve actuator intended for control of Regin’s valves. Information on which valves are suitable can be found in the product information for each valve. Regin also offers adapters for adjusting the actuator to valves of other brands.
More Details...
RVAN5-24 is a valve actuator intended for control of Regin’s valves. Using an adaptor kit, the actuator can also be adapted for use with other valves on the market.
Stroke and end position calibration
Stroke and end position calibration is not necessary due to a construction utilizing end position stops.
Stroke and end position calibration
Stroke and end position calibration is not necessary due to a construction utilizing end position stops.
More Details...
Butterfly valves for use in heating, cooling and ventilation systems. The butterfly valve is used as a shut off valve or a control valve (10° - 70° opening). Manual operation is possible through a hand lever. Flow can be bi-directional.
More Details...
The V-3000-8012 and V-3000-8003 Pneumatic Valve Actuators are designed to accurately position steam or water valve modulating plugs in response to a
pneumatic signal from a controller. A V-9502 Valve Positioner can be ordered separately for use with the V-3000-8012 only, in applications where sequential
operation is desired or additional positioning power is necessary.
pneumatic signal from a controller. A V-9502 Valve Positioner can be ordered separately for use with the V-3000-8012 only, in applications where sequential
operation is desired or additional positioning power is necessary.
More Details...
Feature
- Â Digit Indication Hand-wheel - Accurate and clear indication of the scale, enabling operators of easy and correct commissioning.
- Â High-grade Materials for DN65~DN500 - QT450-10 High-grade ductile iron for valve body. High-grade stainless steel for balancing disc and stem with sound anti-corrosion performance.
More Details...
Features
1: DN15 to DN250 available
2: Kvs 0.63 to 700 m3/h
3: High-grade ductile iron QT450-10 for valve body
4: Standard flange connection of ISO7005-2
5: Fitted with VAP-B, VAF series actuator with various â–łP available for different applications
1: DN15 to DN250 available
2: Kvs 0.63 to 700 m3/h
3: High-grade ductile iron QT450-10 for valve body
4: Standard flange connection of ISO7005-2
5: Fitted with VAP-B, VAF series actuator with various â–łP available for different applications
The VG3000 brass valve series is primarily designed to regulate the flow of water in response to the demand of a controller in zone and terminal unit applications.
Following actuators are available:
Following actuators are available:
- VA-708x thermal ON/OFF actuator
- VA-709x thermal 0...
More Details...
VG1000 Series Ball Valves are designed to regulate the flow of hot or chilled water and, for some models, low-pressure steam in response to the demand of a controller in HVAC systems. Available in sizes 1/2 through 2 in.
More Details...
The VG1000 series control ball valves are used for the water control of air treatment systems in ventilation and air conditioning units as well as heating system.
They are operated by remote mounted Spring Return and Non Spring Return actuators of Johnson Controls.
They are operated by remote mounted Spring Return and Non Spring Return actuators of Johnson Controls.
More Details...
The VA9300 Series Electric Non-Spring Return Actuators are direct mount actuators for valves with ISO Flange mounting such as the VG1000 Series Valves. The series consists of models with on/off and floating controls as well as models with Automatic Signal Input Detection which allows automatic recognition of input signals for on/off, floating, and proportional control.
More Details...
The VA9104 Series Actuators are direct-mount, non-spring return electric valve actuators that operate on AC 24 V or 100 to 240 VAC power. Use these synchronous motors or stepper motors (for line voltage models) driven actuators to provide accurate positioning on Johnson Controls® VG1000 Series DN15, DN20, and DN25 (1/2, 3/4, and 1 in.) ball valves in HVAC applications.
More Details...
