Building automation system

RC-C3DFOC is a room controller from the Regio series. It has a button for controlling a three-speed fan (fan coil), display, and communication via RS485 (Modbus, BACnet or EXOline) for integration into systems.

Regio
Regio is a wide series of controllers which handle heating and cooling. The controllers are divided into three different series, Mini, Midi and Maxi.

RC-C3 is a room controller from the Regio series. It has communication via RS485 (Modbus or EXOline) for integration into systems.

Regio
Regio is a wide series of controllers which handle heating and cooling. The controllers are divided into three different series, Mini, Midi and Maxi. Mini are pre-programmed, stand-alone controllers.

RCP200 and RCP200T are controllers from the Regio series. They have communication via RS485 (Modbus or EXOline) alt. TCP/IP (RCP200T) for integration into systems. The controllers can be configured via Regio Tool© and freely programmed via EXOdesigner. The controllers are connected to different room units
(RU-units) with built-in temperature sensor from the Regio series.

RCP100 and RCP100T are controllers from the Regio series. They have communication via RS485 (Modbus or EXOline) alt. TCP/IP (RCP100T) for integration into systems. The controllers can be configured via Regio Tool© and freely programmed via EXOdesigner. The controllers are connected to different room units (RU-units) with built-in temperature sensor from the Regio series.

RCF-230TD is a controller for controlling heating and/or cooling in a room. It is intended for control of thermal actuators or an actuator with 3-position function (increase-decrease), and also has a function for three-speed fan control (for fan-coil). The controller has supply voltage 230 V AC.

AL24A1K is a compact controller for duct-mounting with built-in sensor and one 0...10 V output. It is intended for control of heating or cooling in ventilation and airhandling systems. It can be set to P- or PI-control and has an input for seasonal change-over between heating and cooling.The P-Band is adjustable 0,5...

TM2-24/D is an electronic thermostat to be used in conjunction with Regin temperature sensors. The thermostat has closing relay contacts and can be set for heating or cooling. TM2-24D is supplied in standard casing for DIN-rail mounting with all settings accessible on the front.

TM1N/D is an electronic thermostat to be used in conjunction with Regin NTC temperature sensors. The thermostat has a changeover relay contact and is able to control both heating or cooling functions. TM1N/D is supplied in standard casing for DIN-rail mounting with all settings accessible on the front.

Function
SC2/D is a two stage signal converter which converts a 0-10V signal into two closing relay outputs and can be set for heating or cooling. SC2/D comes in a standard casing for DIN-rail mounting and has all settings accessible on the front.

Control modes
Switches 1-3 are used to set the relay sequence to fit the application.

SC1/D is a signal converter which converts a 0...10V signal to a single pole relay changeover output. When the input signal reaches the preset signal level the relay output changes. SC1/D comes in standard casing for DIN-rail mounting and has all settings accessible on the front.

Optigo OP10 is a new pre-programmed, configurable controller. It has been designed with the main intention of replacing a number of Regin’s Aqualine controllers.

Optigo
Optigo Regin´s newest controller series intended to control temperature, CO2, pressure, humidity in HVAC and heating applications. A simple stand-alone controller for smaller applications.

Optigo OP5U is a pre-programmed, configurable controller for air handling or pressure control applications. It has been designed with the main intent of replacing a number of Regin’s Aqualine controllers. Starting July 2010, it is possible to connect an external setpoint device. This applies to OP5U models with revision number R18.

SCADA Web Hotel is a service intended to simplify the work of our integrators. Upon delivery, the latest versions of EXOdesigner, EXO4 and EXO4 Web Server
(complete with any eventual patches) are already installed on the hosting service. If an order has been placed for Nimbus Alarm Server (alarm forwarding, e.g.

EXOscada is a comprehensive, powerful web-based SCADA system for the EXO software platform. EXOscada allows an operator to monitor as well as control both system processes and alarms. Historical values can also be displayed in reports and charts. The system has a user-friendly interface, making it easy to get
started.

EXOreport is an add-on program for EXO4 intended for processing, displaying and printing reports and charts that show runtime and measured values. EXOreport also includes functions for designing reports and freely deciding the design of the reports and their data contents.

EXOkey is a hardware lock used to protect the EXO software. EXO4 is included on delivery of all the keys. The size of EXOkey is not, like before, determined by
the number of installed controllers, but by the number of installed physical I/O-points. This gives you a fair price whether you install small or large controllers.

EXOhotel is a software package for connection of a hotel booking system to an EXO4 system with a controller in each hotel room. The system is based on OPC technology. When the hotel guest checks in, a message is sent from the booking system to EXOhotel, which in turn sends a command to the controller in the guest room to go to economy mode.

EXOdesigner is a set of software for configuring your EXO system.

From the user’s point of view, EXO4 is a ready-made program that, among other things, contains:

• Windows for monitoring and controlling the processes. These process windows contain process pictures, popup menus, and dynamic elements for displaying and, if required, changing values in the controllers, etc.

Arrigo is a universal portal that ties together a property's technical and administrative systems. Virtually all of the data and functions concerning the property are accessible through direct links and search functions.

Option 9020F is a plug-in card for serial communication on the SIOX bus, typically for certain types of meters. The cable should not be longer than 2000 meters for 300 bps communication speed or 1000 meters at 1200 bps, when used with EXOflex controllers. The bus should normally not be terminated. Up to 20 units with SIOX interface can be hooked up to an EXOflex unit with this option.

Option X9017 is a plug-in card for serial communication on the EIB bus. This interface has no galvanic isolation from the rest of the internal electronics. The option occupies Port 2 or Port 3 in EXOflex, and Port 3 in other controllers. The maximum cable length is 3 meters. It is important that the cable is placed away from power cables.