controllers

RC-C3O is a room controller from the Regio series. It has communication via RS485 (Modbus or EXOline) for integration into systems.

Regio
Regio is a wide series of controllers which handle heating and cooling. The controllers are divided into three different series, Mini, Midi and Maxi. Mini are pre-programmed, stand-alone controllers.

RC-C3H is a room controller from the Regio series. It has communication via RS485 (Modbus or EXOline) for integration into systems.

Regio
Regio is a wide series of controllers which handle heating and cooling. The controllers are divided into three different series, Mini, Midi and Maxi. Mini are pre-programmed, stand-alone controllers.

RC-C3DFOC is a room controller from the Regio series. It has a button for controlling a three-speed fan (fan coil), display, and communication via RS485 (Modbus, BACnet or EXOline) for integration into systems.

Regio
Regio is a wide series of controllers which handle heating and cooling. The controllers are divided into three different series, Mini, Midi and Maxi.

RC-C3 is a room controller from the Regio series. It has communication via RS485 (Modbus or EXOline) for integration into systems.

Regio
Regio is a wide series of controllers which handle heating and cooling. The controllers are divided into three different series, Mini, Midi and Maxi. Mini are pre-programmed, stand-alone controllers.

RCP200 and RCP200T are controllers from the Regio series. They have communication via RS485 (Modbus or EXOline) alt. TCP/IP (RCP200T) for integration into systems. The controllers can be configured via Regio Tool© and freely programmed via EXOdesigner. The controllers are connected to different room units
(RU-units) with built-in temperature sensor from the Regio series.

RCP100 and RCP100T are controllers from the Regio series. They have communication via RS485 (Modbus or EXOline) alt. TCP/IP (RCP100T) for integration into systems. The controllers can be configured via Regio Tool© and freely programmed via EXOdesigner. The controllers are connected to different room units (RU-units) with built-in temperature sensor from the Regio series.

RCF-230TD is a controller for controlling heating and/or cooling in a room. It is intended for control of thermal actuators or an actuator with 3-position function (increase-decrease), and also has a function for three-speed fan control (for fan-coil). The controller has supply voltage 230 V AC.

AL24A1K is a compact controller for duct-mounting with built-in sensor and one 0...10 V output. It is intended for control of heating or cooling in ventilation and airhandling systems. It can be set to P- or PI-control and has an input for seasonal change-over between heating and cooling.The P-Band is adjustable 0,5...

TM2-24/D is an electronic thermostat to be used in conjunction with Regin temperature sensors. The thermostat has closing relay contacts and can be set for heating or cooling. TM2-24D is supplied in standard casing for DIN-rail mounting with all settings accessible on the front.

TM1N/D is an electronic thermostat to be used in conjunction with Regin NTC temperature sensors. The thermostat has a changeover relay contact and is able to control both heating or cooling functions. TM1N/D is supplied in standard casing for DIN-rail mounting with all settings accessible on the front.

Function
SC2/D is a two stage signal converter which converts a 0-10V signal into two closing relay outputs and can be set for heating or cooling. SC2/D comes in a standard casing for DIN-rail mounting and has all settings accessible on the front.

Control modes
Switches 1-3 are used to set the relay sequence to fit the application.

SC1/D is a signal converter which converts a 0...10V signal to a single pole relay changeover output. When the input signal reaches the preset signal level the relay output changes. SC1/D comes in standard casing for DIN-rail mounting and has all settings accessible on the front.

Optigo OP10 is a new pre-programmed, configurable controller. It has been designed with the main intention of replacing a number of Regin’s Aqualine controllers.

Optigo
Optigo Regin´s newest controller series intended to control temperature, CO2, pressure, humidity in HVAC and heating applications. A simple stand-alone controller for smaller applications.

Optigo OP5U is a pre-programmed, configurable controller for air handling or pressure control applications. It has been designed with the main intent of replacing a number of Regin’s Aqualine controllers. Starting July 2010, it is possible to connect an external setpoint device. This applies to OP5U models with revision number R18.

The Field Equipment Controller (FEC) Series products are programmable BACnet® Application Specific Controllers (B-ASCs) with integral Master-Slave/Token Passing (MS/TP) communications. FEC models include the 10-point FEC16 Series and the 17-point FEC26 Series. FEC controllers integrate into the Web-based Metasys® system.

VMA16s (32-bit) and VMA18s are programmable digital controllers tailored for VAV applications that can be switched between MS/TP and N2 communications protocols. When they are used as MS/TP devices, they communicate through the BACnet® MS/TP protocol. In N2 mode, they can be used as replacements for legacy Johnson Controls® controllers.

The PC series includes the PCV Programmable Variable Air Volume (VAV) Box Controller and the PCA Advanced Application Programmable Controller. Modular add-on accessories, such as the PCX Expansion Input/Output (I/O) Modules and NS Series Network Sensors, extend the capabilities of the PC controllers by providing additional I/O interfaces.

The NS Series Network Sensor offering includes NS Series Network Zone Sensors and NS Series Network Discharge Air Sensors.

The Variable Air Volume Box (VAV) Controller is specifically designed for digital control of single duct, dual duct, fan-powered, andsupply/exhaust VAV box configurations. The controller can provide standalone control of the VAV box, and can also integrate control of baseboard heat and lighting logic for the room or zone.

IOMs can serve in one of two capacities, depending on where they are installed in the Metasys system. When installed on the Sensor/Actuator (SA) Bus of an Field Equipment Controller (FEC), Advanced Application Field Equipment Controller (FAC), or VMA controller, the IOMs expand the point count of these controllers.

The Advanced Application Field Equipment Controller (FAC) Series Controllers are programmable controllers that can communicate using BACnet/IP, MS/TP, or N2 communications protocols, depending on the model. The FAC4911 is a BACnet Advanced Application Controller (B-AAC) that communicates using BACnet/IP communications protocol.

The CH-PC Series Programmable Controller family comprises a group of versatile field controllers, including the CH-PCA Advanced Application Programmable
Controller, and accessories designed to monitor, control, and integrate a wide variety of HVAC and other building equipment.