Actuator

RVAN25-24 is a valve actuator intended for control of Regin’s valves. Using an adaptor kit, the actuator can also be adapted for use with other valves on the market.

Stroke and end position calibration
Stroke and end position calibration is not necessary due to a construction utilizing end position stops.

RVAN5-230 is a valve actuator intended for control of Regin’s valves. Information on which valves are suitable can be found in the product information for each valve. Regin also offers adapters for adjusting the actuator to valves of other brands.

RVAN5-24 is a valve actuator intended for control of Regin’s valves. Using an adaptor kit, the actuator can also be adapted for use with other valves on the market.

Stroke and end position calibration
Stroke and end position calibration is not necessary due to a construction utilizing end position stops.

Butterfly valves for use in heating, cooling and ventilation systems. The butterfly valve is used as a shut off valve or a control valve (10° - 70° opening). Manual operation is possible through a hand lever. Flow can be bi-directional.

The V-3000-8012 and V-3000-8003 Pneumatic Valve Actuators are designed to accurately position steam or water valve modulating plugs in response to a
pneumatic signal from a controller. A V-9502 Valve Positioner can be ordered separately for use with the V-3000-8012 only, in applications where sequential
operation is desired or additional positioning power is necessary.

The VA9300 Series Electric Non-Spring Return Actuators are direct mount actuators for valves with ISO Flange mounting such as the VG1000 Series Valves. The series consists of models with on/off and floating controls as well as models with Automatic Signal Input Detection which allows automatic recognition of input signals for on/off, floating, and proportional control.

The VA9104 Series Actuators are direct-mount, non-spring return electric valve actuators that operate on AC 24 V or 100 to 240 VAC power. Use these synchronous motors or stepper motors (for line voltage models) driven actuators to provide accurate positioning on Johnson Controls® VG1000 Series DN15, DN20, and DN25 (1/2, 3/4, and 1 in.) ball valves in HVAC applications.

The VA7810 non spring return actuator with 1000 N thrust for valves in heating, ventilation and air conditioning applications is available for floating or proportional control. All models have manual override as standard and provide stroke capabilities of 7 mm to 25 mm. Proportional models are self-calibrating.

The VA-7080 Terminal Unit Valve Actuators series provide ON/OFF and DAT control in HVAC application. The compact design of these actuators make them suitable for installations in confined spaces, such as fan-coil applications. The VA-7080 Actuators are designed for field mounting onto all Johnson Controls Terminal Unit Valves: VG3000, VP1000 (see pertinent Product Bulletins).

The VA1000 valve actuators are used to control valves in HVAC systems. They are of modular construction so that the required type of control signal is achieved simply by fitting a module with the required function in-situ. It can be mounted onto VG8000, VG8300 and VG9000 series valves.

VA-748x Series Electric Valve Actuators provide floating or proportional control in HVAC applications. The compact design of this actuator series makes it ideal for installations in confined locations, such as fan coil applications. The VA-748x Series Actuator is designed for field mounting onto the terminal unit valves made by
Johnson Controls and its competitors.

The RA-3000 series synchonous motor-driven reversible actuators are available for 3-point (floating) or with electric positioner for 0-10V control. They feature factory calibrated pressure switches to provide specified close-off ratings.

The M9203-xxx-2(Z) Series Electric Spring Return Actuators provide control of dampers in Heating, Ventilating, and Air Conditioning (HVAC) systems. All actuators in this series provide 27 lb·in (3 N·m) rated torque. A mechanical spring return system provides rated torque with or without power applied to the
actuator.

The M9124-GGx and M9124-HGx Series direct-mount electric actuators operate on 24 VAC or VDC power. These actuators are available for use with proportional controllers. These bidirectional actuators do not require a damper linkage and are easily installed on a damper with a round shaft up to 3/4 in. (19 mm) in diameter or a square shaft up to 5/8 in. (16 mm).

The M9109 Series direct-mount electric actuators operate on 24 VAC power and are available for use with floating or proportional controllers. These non-spring return actuators are easily installed on a Variable Air Volume (VAV) box and a damper with a steel shaft up to 1/2 in. (13 mm) in diameter or 3/8 in. (10 mm) square.

The M9108-GGx-2 and M9108-HGx-2 Series direct-mount electric actuators operate on 24 VAC or VDC power, and are available for use with proportional controllers. These bidirectional actuators do not require a damper linkage, and are easily installed on a damper with a round shaft up to 3/4 in. (19 mm) in diameter or a square shaft up to 5/8 in. (16 mm).

The M9106-xGx-2 Series direct-mount electric actuators operate on AC 24 V power and are available for use with on/off, floating, or proportional controllers. These non-spring-return actuators are easily installed on a VAV box, a damper with a round shaft up to 1/2 in. (13 mm) in diameter, or a square shaft up to 3/8 in. (10 mm).

VG4000 Series High-Capacity/High-Closeoff Electric Zone Valves are designed to regulate the flow of water in response to the demand of a controller in zone and Variable Air Volume (VAV) reheats coil applications. The high-capacity/highcloseoff capability of the VG4400xx-C and VG4800xx-C also makes this family of valves an ideal choice for fan coil and baseboard radiation applications.